Speedway 11/16 Inch Raw Tie Rod/Drag Link Tubing 42.5 Inch

$28.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store speedway_motors
(294115) 99.5%,

Location: Lincoln, Nebraska
Ships to: US,
Item: 135054731890

Return shipping will be paid by:Seller
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Return policy details:
Speedway Motors:Speedway Motors
Type:Swedged Tubes
Manufacturer Part Number:91634-42.5
Finish:Natural
Item Length:39.50
California Prop 65 Warning:True
Size:42.5″

The length chosen in the drop down below is to be your overall assembled eye to eye length required, Has a 11/16″-18 thread pitch with left hand threads on one end and right hand threads on the other, Made from heavy-duty steel with a natural finish, Available in several lengths to custom fit your application, Tube has an outside diameter measuring a total of .875″ Speedway 11/16 Inch Raw Tie Rod/Drag Link Tubing 42.5 Inch Sku # 91634-42.5 Mfr. Part # 91634-42.5 Condition New Brand Speedway Motors Sold Each Details Info Bare unfinished steel tube for steering linkage and other chassis uses Use for tie rod, drag link, chassis bracing, and more Ends threaded 11/16-18 LH and RH threads for rod ends or bushings of your choice Available in 13 lengths from 10-3/4-inches to 54-inches long Outside diameter of tube is .875-inch Single rotation will adjust the overall length in or out by approximately 1/8-inch Order by center-to-center measurement required for application Our Bare Steel Tubes Are Perfect for Budget Builds Building a hot rod or muscle car can take a real beating on the wallet. We all want the best quality materials with high-end components, but in the reality of it all sometimes more basic components get the green light to be able to finish the project. We understand that not everyone has the funds for high-end suspension components, modern drivetrain swaps, and the like. Therefore, we offer several options in every product category we sell. When building your hot rod’s custom steering linkage or designing your under-hood chassis bracing, we offer these budget friendly raw steel tubes to get the job done. These steel tubes are perfect for those low-buck projects. Simply give them a shot of paint, or powder coat them if you choose, and make some real progress on your build. Strong Steel Construction for Strength, Ready for Paint or Powder Coat We offer these super strong steel threaded tubes for your project in a bare paintable finish. The bare steel finish allows you to paint them to match or contrast your vehicle’s frame or body. You can even powder coat them if desired. Available in 13 different lengths from 10-3/4-inches to 54-inches, these steel tubes are threaded to accept 11/16-18 rod ends, bushings, or clevises with left-hand and right-hand threads. This allows the adjusting sleeve to be mounted between two points of adjustment, such as a drag link or tie rod in a steering system, among other fitment applications. Rotating the threaded tube moves the threaded ends of your choice inward or outward for adjustment. For the 11/16-18 thread ends these bare steel sleeves utilize this equates to roughly 1/8-inch of adjustment for each full rotation of the hollow threaded tube. Great for Chassis and Steering Needs Wherever you wish to use an adjustable threaded tube to your build, be it for a steering linkage, chassis support, or elsewhere, it is easy to figure out exactly what you need for your ride. Simply measure the center-to-center distance of your two adjustment or mounting points and then order the closest length to that measurement. The rod ends, bushings, or clevises you choose will add 3 inches to the overall length. So, if your measurement is 45-inches, that is what you will order from the drop-down menu, however the tube you will receive will be 42-inches in length. The 45-inch length will be your final length once you have threaded in your ends approximately halfway. So, remember, order by center-to-center length, not just the threaded tube length, to get the correct length you need for your application. Installation Tips If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. We stock many common and uncommon lengths. Measurements are in assembled eye-to-eye lengths. To order: Use guide below to measure your finished length. The tube that you receive will be 3″ shorter than the part # indicates. (I.E., if you order a 48″ part number, you will receive a 45″ long sleeve.) This is the difference in length required to give you the correct finished center-to-center measurement. All sleeves will have internal RH thread in one end and LH thread in the other. (GIF) Specs Material Type Steel Sold in Quantity Each Finish Natural Tube O.D. 0.875 MFG. Part # 91634-42.5 Thread Pitch 11/16″-18 RH/LH Overall Length 39.5 Reviews worked great Rated by Mark on February 17, 2022 Summary: Great fit Yes, I recommend this product. Great for custom drag link Rated by Zac on January 06, 2022 Summary: Great product. Just wish they had more options in length between the 10.75 and the next was long and definitely could have been more available Yes, I recommend this product. This part was good quality for the money spent. Rated by Joe on November 25, 2021 Summary: I hope this hallow tube is strong enough for manual steering I would buy this product again! Rated by Gary on September 14, 2021 Summary: These tubes were the perfect length I needed. They saved me the time to build them on my lathe and tap them. They were used on a steering angle correction for the tie rod sleeves for my 71 C10 since no company builds a bump steer correction kit. Yes, I recommend this product. Quality Rated by King on September 10, 2021 Summary: These fit well and were easier than tapping DOM myself Related Items / Suggested Parts Speedway Plain Steel Jam Nut, 11/16-18 RH Speedway Ford Outer Tie Rod End, 11/16-18 RH Thread Tech Support We’re here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Frequently Asked Questions About Speedway 11/16 Inch Raw Tie Rod/Drag Link Tubing 42.5 Inch in My Website

jphs.snru.ac.th is the best online shopping platform where you can buy Speedway 11/16 Inch Raw Tie Rod/Drag Link Tubing 42.5 Inch from renowned brand(s). jphs.snru.ac.th delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Speedway 11/16 Inch Raw Tie Rod/Drag Link Tubing 42.5 Inch on jphs.snru.ac.th?