5.25" slimline bay / adapter / carrier – compact flash / dual CF / SD to IDE – PHUPHAN SARN Journal of Humanities and Social Science

5.25
5.25
5.25
5.25
5.25
5.25
5.25

$7.25 Buy It Now or Best Offer
free,30-Day Returns

Seller Store markgm
(2406) 100.0%,

Location: Plymouth, Connecticut
Ships to: US,
Item: 304058663521

Restocking Fee:No
Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Type:Carrier
Connector A:IDE/EIDE/PATA Male
Unbranded:Unbranded

**This does not fit a standard 5.25″ CD-ROM drive bay (see below for links to that model).** I created these slimline carriers allow easy access to compact flash and SD cards. They are approximately 1 1/8″ tall, a size used in some Compaq systems. See my other auctions for a standard 5.25″ drive bay carrier. You have a choice between 1 or 2 slot compact flash to IDE, SD to IDE, mSD to IDE and a carrier only option for Startech compact flash to IDE boards. The single slot CF to IDE boards can operate as either a master or slave device, selectable via a jumper on the board. The board is powered by a floppy power connector (cables and flash card are not included). You can attached other devices to the IDE cable as needed. The dual slot CF to IDE board is seen by the PC as two drives (primary and secondary). When using two drives it should be installed on the end of the IDE cable. When the jumper is on pins 1 and 2 the top card slot is the master and the bottom card is the slave. When the jumper is on pins 2 and 3 the top card is the slave and the bottom card is the master. No other device can be on the IDE cable when using dual CF card readers (as the card it seen as two IDE devices). If you only want to use one CF card on the dual readers you can move the card to the secondary IDE port on the cable and use the top slot. The jumper should be on pins 2 and 3 (this effectively makes the dual slot CF to IDE board a single slot CF to IDE board). All cards are inserted with the label facing up. You can add on a 4 pin Molex to floppy power connector to your order. This is especially handy in tight cases where it would be challenging to get the power cable to the IDE board. Features/Specs:40 or 80 pin standard male IDE connectorMaster or slave mode selection on CF card readersSingle or dual 50-Pin standard compact flash socket The SD and microSD to IDE card readers only work as the master device on each IDE cable. You can attach a slave device without any issues. The carriers have holes that align in the typical CD-ROM / floppy drive configuration on the sides and bottom. You can power the SD to IDE adapter board with either the floppy power connector or the hard drive Molex connector, (as noted above, the CF/2CF boards are powered by a floppy Molex connector). Reach out if you’d like another color; if I can obtain the filament I can print it. Let me know if there is another style you are looking for, I can customize the carriers (e.g. SD card reader and compact flash). I can desolder the LEDs on the boards if you would like them to remain dark inside your case. Fast Priority Mail shipping from Connecticut. For standard 5.25″ drive bays (like a CD-ROM drive):5.25″ (40 pin) SD to IDE carrier or adapter with carrier: https://www.ebay.com/itm/3035722184105.25″ (40-pin) Syba/StarTech: https://www.ebay.com/itm/3040351035415.25″ (40 pin) CF to IDE carrier + adapter: https://www.ebay.com/itm/303944673135 Check out my other auctions if you are looking for other options, including: SD to IDE2.5″ (44 pin) SD to IDE adapter, carrier, or adapter with carrier: https://www.ebay.com/itm/3036031286293.5″ (40 pin) SD to IDE adapter, carrier, or adapter with carrier: https://www.ebay.com/itm/303551644199IBM 5155 (40 pin) SD to IDE carrier or adapter with carrier: https://www.ebay.com/itm/303759975163PCI bracket for 3.5″ SD to IDE (40 pin) adapter: https://www.ebay.com/itm/303596143604PCI bracket with 3.5″ SD to IDE (40 pin) adapter: https://www.ebay.com/itm/303596155608 SD to SATA3.5″ SD to SATA carrier: https://www.ebay.com/itm/303626443059PCI bracket for 3.5″ SD to SATA adapter: https://www.ebay.com/itm/303626443059 MicroSD to IDE3.5″ (40 pin) microSD to IDE adapter, carrier, PCI bracket with adapter, or adapter with carrier: https://www.ebay.com/itm/303610388930PCI bracket for 3.5″ (40 pin) microSD to IDE adapter: https://www.ebay.com/itm/303610395976MicroSD to IDE board: https://www.ebay.com/itm/303628777382 Compact flash to IDE3.5″ (40 pin) Single or Dual CF to IDE adapter with carrier: https://www.ebay.com/itm/303591855018PCI bracket with Single or Dual 3.5″ CF to IDE (40 pin): https://www.ebay.com/itm/303599104175 SATA to PATA5.25″ drive bay for 2.5″ SATA drives to PATA / IDE: https://www.ebay.com/itm/303717734405 3.5″ / 5.25″ Floppy Disk Cleanerhttps://www.ebay.com/itm/303620862566 Replacement feet for IBM 5151/5153/5154 monitorshttps://www.ebay.com/itm/303761428208 Let me know if there is another style or component you are looking for, I can create custom parts. Thanks!

Frequently Asked Questions About 5.25″ slimline bay / adapter / carrier – compact flash / dual CF / SD to IDE in My Website

jphs.snru.ac.th is the best online shopping platform where you can buy 5.25″ slimline bay / adapter / carrier – compact flash / dual CF / SD to IDE from renowned brand(s). jphs.snru.ac.th delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 5.25″ slimline bay / adapter / carrier – compact flash / dual CF / SD to IDE on jphs.snru.ac.th?